web analytics

[3/Apr/2018 Updated] PassLeader Offer 557q 300-101 PDF and VCE Dumps With New Update Questions

New Updated 300-101 Exam Questions from PassLeader 300-101 PDF dumps! Welcome to download the newest PassLeader 300-101 VCE dumps: https://www.passleader.com/300-101.html (557 Q&As)

Keywords: 300-101 exam dumps, 300-101 exam questions, 300-101 VCE dumps, 300-101 PDF dumps, 300-101 practice tests, 300-101 study guide, 300-101 braindumps, Implementing Cisco IP Routing Exam

P.S. New 300-101 ROUTE dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpZEE0S2YxR3ZMUWs

>> New 300-115 SWITCH dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

>> New 300-135 TSHOOT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpSV82OWY1cnV1Z3c

NEW QUESTION 536
Which three protocols support DMVPN? (Choose three.)

A.    EIGRP
B.    RIP2
C.    OSPF
D.    BGP
E.    ISIS

Answer: ABC

NEW QUESTION 537
When a packet is denied by an IPv6 traffic filter, which additional action does the device perform?

A.    It scans the rest of the ACL for a permit entry matching the destination.
B.    It generates a TCP Fin bit and sends it to the source.
C.    A creates a null route for the destination and adds it to the route table.
D.    It generates an ICMP unreachable message for the frame.

Answer: A

NEW QUESTION 538
Which two commands must you configure in the calling router to support the PPPoE client? (Choose two.)

A.    peer default ip address pool
B.    bba-group pppoe
C.    pppoe-client-dial-pool-number
D.    mtu
E.    pppoe enable group

Answer: CD

NEW QUESTION 539
What is the default maximum segment size for TCP traffic?

A.    536
B.    1492
C.    1500
D.    1508
E.    3340
F.    4096

Answer: A

NEW QUESTION 540
Which two statements about Frame Relay LMI autosense are true on a Router? (Choose two.)

A.    It requires the LMI type to be explicitly configured.
B.    It operates on Frame Relay DTE interfaces.
C.    It operates on Frame Relay DCE interfaces.
D.    It operates when the line is up by the line protocol is down.
E.    It requires the line protocol to be up.

Answer: BD
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios/12_2/wan/configuration/guide/fwan_c/wcffrely.html

NEW QUESTION 541
Which Cisco Express Forwarding table or tables hold forwarding information?

A.    FIB table only
B.    Adjacency tables only
C.    FIB and adjacency tables only
D.    FIB, RIB, and adjacency tables

Answer: B
Explanation:
Cisco Express Forwarding uses adjacency tables to prepend Layer 2 addressing information to packets.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipswitch_cef/configuration/15-mt/isw-cef-15-mt-book/isw-cef-overview.html

NEW QUESTION 542
Refer to exhibit. If the IGP in AS65000 is RIPv2, which networks are displayed when you enter show ip route on router R2?
……

A.    VLSM subnts in 10.0.0.0/16 and the major network 10.2.0.0/16 only
B.    VLSM subnets in 10.0.0.0/16 and the major network 10.2.0.0/16 only
C.    VLSM subnets in 10.0.0.0/16 only
D.    Major networks 10.1.0.0/16 and 10.2.0.0/16 only
E.    VLSM subnets in 10.0.0.0/16 and the major networks 10.1.0.0/16 10.2.0.0/16

Answer: D

NEW QUESTION 543
Which three statements about IPv6 EIGRP are true? (Choose three.)

A.    EIGRP neighbor relationships are formed using the link-local address.
B.    EIGRP neighbor relationships can be formed only on the configured IPv6 address.
C.    It supports EUI-64 addresses only.
D.    EIGRP route advertisement is configured under the interface configuration.
E.    An IPv6 EIGRP router ID is required.
F.    EIGRP route advertisement is configured under the ipv6 router eigrp configuration.

Answer: ADE

NEW QUESTION 544
Which two technologies can encapsulate an IPv6 payload in an IPv4 packet for transmission across a network? (Choose two.)

A.    L2TPv3
B.    Trunking
C.    AToM
D.    ISATAP
E.    NAT-PT

Answer: DE

NEW QUESTION 545
Which two statements about OSPF E1 routes are true? (Choose two.)

A.    They are preferred over interarea routes.
B.    They use the OSPF cost from redistribution and the OSPF cost to the ASBR.
C.    They are preferred over E2 routes.
D.    They use only the OSPF cost to the ASBR.
E.    They use only the OSPF cost from redistribution.

Answer: BC
Explanation:
http://blog.ine.com/2011/04/04/understanding-ospf-external-route-path-selection/

NEW QUESTION 546
Which command do you enter to filter only routing updates that are sent through interface GigabitEthernet0/0?

A.    R1(config-if)#passive-interface GigabitEthernet0/0.
B.    R1(config-router)#no passive-interface GigabitEthernet0/0
C.    R1(config-router)#passive-interface GigabitEthernet0/0
D.    R1(config-router)#passive-interface default
E.    R1(config-if)#passive-interface default
F.    R1(config-router)#distribute-list 1 GigabitEthernet0/0 out

Answer: C

NEW QUESTION 547
……

NEW QUESTION 555
Drag and Drop
Drag and drop the methods supported by the aaa authorization command from me left onto me correct descriptions on the right.
……

NEW QUESTION 556
Drag and Drop
Drag and drop the ACL types from the left onto the correct description on the right.
……

NEW QUESTION 557
Drag and Drop
Drag and Drop the Frame Relay LMI extensions from the left onto the correct descriptions on the right.
……


Download the newest PassLeader 300-101 dumps from passleader.com now! 100% Pass Guarantee!

300-101 PDF dumps & 300-101 VCE dumps: https://www.passleader.com/300-101.html (557 Q&As) (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!)

P.S. New 300-101 ROUTE dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpZEE0S2YxR3ZMUWs

>> New 300-115 SWITCH dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpV1dGa2Q3czNVNG8

>> New 300-135 TSHOOT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpSV82OWY1cnV1Z3c

Welcome To Visit PassLeader